Investigation of the potential for electrification of remote areas using parabolic solar collectors in southern Algeria.

The dish stirling technology holds great promise as a renewable energy solution for remote and off-grid electric regions, particularly in the southern areas of North Africa. In this research, we conducted simulations of a 100 kw Dish Stirling system to evaluate its feasibility in comparison to photovoltaic technology at five distinct locations in southern Algeria: Adrar (Bordj Badji Mokhtar), Illizi (Djanet), Tamanrasset (Ain Mertoutek), Tindouf, and Bechar. Our findings underscore the substantial potential of Dish Stirling Solar Power technology, with the Sahara region standing out as particularly promising. In this region, the Dish Stirling system consistently outperforms a 100 kw photovoltaic system across all selected locations. The Dish Stirling system achieves an average annual electricity generation of 256 mwh while simultaneously mitigating CO2 emissions by 177 tons annually. Among these locations, Djanet Illizi emerges as the most favorable, with the Dish Stirling system producing an impressive 288.43 mwh annually. This capacity is sufficient to meet the annual energy needs of 230 households, all while maintaining a competitive LCOE of 0.0378 USD/kwh. Comparative analysis with previous research illuminates the remarkable cost-effectiveness of Dish Stirling technology in southern Algeria, primarily due to its abundant direct normal irradiance levels. These findings underscore the immense potential of Dish Stirling systems as a clean and highly efficient energy solution, well-suited for demanding to address the energy needs of remote environments, such as those found in the southern border regions of Algeria.

Achieving Long Cycle Life of Zn-Ion Batteries through Three-Dimensional Copper Foam.

Metallic zinc anodes in aqueous zinc-ion batteries (ZIBs) suffer from dendritic growth, low Coulombic efficiency, and high polarization during cycling. To mitigate these challenges, current collectors based on three-dimensional (3D) commercial copper foam (CCuF) are generally preferred. However, their utilization is constrained by their thickness, low electroactive surface area, and increased manufacturing expenses. In this study, the synthesis of cost-effective current collectors with exceptionally large surface areas designed for ZIBs that can be cycled hundreds of times is reported. A zinc-coated CuF anode (Zn/CuF) was prepared with a 3D porous CuF current collector produced by the dynamic hydrogen bubble template (DHBT) method. Electrochemically generated copper foam could be obtained within seconds while offering a thickness as low as 30-40 µm (CuF5 achieved a thickness of ∼38 µm in 5 s) via the DHBT method. The excellent electrical conductivity and open pore structure of the 3D porous copper scaffold ensured the uniform deposition/stripping of Zn during cycling. During the 500 h Zn deposition/stripping process, the as-synthesized CuF5 current collector offered fast electrochemical kinetics and low polarization as well as a relatively high average Coulombic efficiency of 99% (at a current density of 5 mA cm-2 and a capacity of 1 mAh cm-2). Furthermore, the symmetric cell exhibited low voltage polarization and a stable voltage profile for 1000 h at a current density of 0.1 mA cm-2. In addition, full cells containing the Zn/CuF anode coupled with an as-synthesized α-MnO2 nanoneedle cathode in aqueous electrolyte were also prepared. Capacities of 266 mAh g-1 at 0.1 A g-1 and 94 mAh g-1 at 2 A g-1 were achieved after 200 charge/discharge cycles with a stable Coulombic efficiency value close to 99.9%.

Lightweight 3D Lithiophilic Graphene Aerogel Current Collectors for Lithium Metal Anodes.

Constructing three-dimensional (3D) current collectors is an effective strategy to solve the hindrance of the development of lithium metal anodes (LMAs). However, the excessive mass of the metallic scaffold structure leads to a decrease in energy density. Herein, lithiophilic graphene aerogels comprising reduced graphene oxide aerogels and silver nanowires (rGO-AgNW) are synthesized through chemical reduction and freeze-drying techniques. The rGO aerogels with large specific surface areas effectively mitigate local current density and delay the formation of lithium dendrites, and the lithiophilic silver nanowires can provide sites for the uniform deposition of lithium. The rGO-AgNW/Li symmetric cell presents a stable cycle of about 2000 h at 1 mA cm-2. When coupled with the LiFePO4 cathode, the assembled full cells exhibit outstanding cycle stability and rate performance. Lightweight rGO-AgNW aerogels, as the host for lithium metal, can significantly improve the energy density of lithium metal anodes.

Cocreation of photogenerated electron and hole collectors on polymeric carbon nitride synergistically promotes carrier separation and reaction kinetics towards propelling photocatalytic hydrogen evolution.

It is a challenging issue for the creation of photogenerated carrier collectors on the photocatalyst to drive charge separation and promote reaction kinetics in the photocatalytic reaction. Herein, based on one-step dual-modulation strategy, IrO2 nanodots are modified at the edge of polymeric carbon nitride (PCN) nanosheets and atomically dispersed Ir atoms are implanted in the skeleton of PCN to obtain a unique Ir-PCN/IrO2 photocatalyst. IrO2 nanodots and atomically dispersed Ir atoms act as hole and electron collectors to synergistically promote the carrier separation and reaction kinetics, respectively, thereby greatly improving the photocatalytic hydrogen evolution (PHE) performance. As a result, without adding additional cocatalyst, the PHE rate over the optimal Ir-PCN/IrO2-2% sample reaches up to 1564.4 µmol h-1 g-1 under the visible light irradiation, with achieving an apparent quantum yield (AQY) of 15.7% at 420 nm.

Acidity-Aided Surface Modification Strategy to Enhance In Situ MnO2 Deposition for High Performance Zn-MnO2 Battery Prototypes.

Zn-MnO2 batteries offer cost-effective, eco-friendly, and efficient solutions for large-scale energy storage applications. However, challenges, like irreversible cathode reactions, prolonged cyclability, and electrolyte stability during high-voltage operations limit their broader application. This study provides insight into the charge-discharge process through in situ deposition of active ß-MnO2 nanoflakes on a carbon-based current collector. The study elucidates the effect of pH and electrolyte concentration on chemical conversion reactions with Zn, in particular focus on their impact on the two-electron MnO2/Mn2+ reaction crucial for high voltage operation. The electrolyte, characterized by being relatively lean in Mn2+ and with a targeted low pH, enables extended cycling. This research achieves greater cycling durability by integrating a carbon-based cathode current collector with high density of structural defects in combination with cell architectures suitable for large-scale energy storage. A flooded stack-type Zn-MnO2 battery prototype employing the optimized electrolyte demonstrates a high discharge voltage (≈2 V) at a substantial discharge current rate of 10 mA cm-2. The battery exhibits an impressive areal capacity of ≈2 mAh cm-2, maintaining ≈100% capacity retention over 400 cycles. This research establishes a promising practical, and cost-effective cathode-free design for Zn-MnO2 batteries, that minimizes additional processing and assembly costs.

Unraveling the impact of customer mistreatment on highway toll collectors' turnover intentions: the roles of stress symptoms, affective commitment, and neuroticism.

In the service industry, highway toll collectors serve as a distinctive frontline workforce who frequently encounter mistreatment from customers. Unfortunately, these behaviors have not received the attention and resolution they deserve, resulting in significant physical and psychological stress for toll collectors and exacerbating turnover rates. The study highlights how customer mistreatment affects toll collectors' turnover intentions by performing the sequential mediating roles of stress symptoms and affective commitment and assumes that neuroticism exacerbates the stress symptoms resulting from customer mistreatment based on affective events theory. The model was tested using data collected from 230 highway toll collectors in Zhuhai, China. All hypotheses received support. This study holds both theoretical and practical implications for future research.

Structural Design of 3D Current Collectors for Lithium Metal Anodes: A Review.

Due to the ultrahigh theoretical specific capacity (3860 mAh g-1) and low redox potential (-3.04 V vs. standard hydrogen electrode), Lithium (Li) metal anode (LMA) received increasing attentions. However, notorious dendrite and volume expansion during the cycling process seriously hinder the development of high energy density Li metal batteries. Constructing three-dimensional (3D) current collectors for Li can fundamentally solve the intrinsic drawback of hostless for Li. Therefore, this review systematically introduces the design and synthesis engineering and the current development status of different 3D collectors in recent years (the current collectors are divided into two major parts: metal-based current collectors and carbon-based current collectors). In the end, some perspectives of the future promotion for LMA application are also presented.

Dendrite-Free and High-Rate Potassium Metal Batteries Sustained by an Inorganic-Rich SEI.

Potassium metal battery is an appealing candidate for future energy storage. However, its application is plagued by the notorious dendrite proliferation at the anode side, which entails the formation of vulnerable solid electrolyte interphase (SEI) and non-uniform potassium deposition on the current collector. Here, this work reports a dual-modification design of aluminum current collector to render dendrite-free potassium anodes with favorable reversibility. This work achieves to modulate the electronic structure of the designed current collector and accordingly attain an SEI architecture with robust inorganic-rich constituents, which is evidenced by detailed cryo-EM inspection and X-ray depth profiling. The thus-produced SEI manages to expedite ionic conductivity and guide homogeneous potassium deposition. Compared to the potassium metal cells assembled using typical aluminum current collector, cells based on the designed current collector realize improved rate capability (maintaining 400 h under 50 mA cm-2 ) and low-temperature durability (stable operation at -50 °C). Moreover, scalable production of the current collector allows for the sustainable construction of high-safety potassium metal batteries, with the potential for reducing the manufacturing cost.

MXene-Based Current Collectors for Advanced Rechargeable Batteries.

As an indispensable component of rechargeable batteries, the current collector plays a crucial role in supporting the electrode materials and collecting the accumulated electrical energy. However, some key issues, like uneven resources, high weight percentage, electrolytic corrosion, and high-voltage instability, cannot meet the growing need for rechargeable batteries. In recent years, MXene-based current collectors have achieved considerable achievements due to its unique structure, large surface area, and high conductivity. The related research has increased significantly. Nonetheless, a comprehensive review of this area is seldom. Herein the applications and progress of MXene in current collector are systematically summarized and discussed. Meanwhile, some challenges and future directions are presented.

Solar-assisted oxidation of organochlorine pesticides in groundwater using persulfate and ferrioxalate.

The oxidation of hexachlorocyclohexane isomers in the aqueous phase (Milli-Q and groundwater) was studied using persulfate activated by ferrioxalate and solar light at circumneutral pH. The experiments were conducted in a solar simulator reactor with local radiation fluxes qw= 1.12·10-7 E cm-2s-1 and in compound parabolic collectors with solar light (qw≈10-7 E cm-2s-1) for 390 min. The effect of activator dosage (18-125 µM ferrioxalate) and persulfate concentration (520-2600 µM) on hexachlorocyclohexane conversion and oxalate and oxidant consumption was analyzed. Conversion of about 95% of ß isomer was achieved at 390 min using 1300 µM of initial persulfate and 63 µM of Fe3+ concentration despite this ß isomer being the most recalcitrant to oxidation (XHexachlorocyclohexanes=0.98). Dechlorination above 80% was achieved under these conditions, analyzing the chlorides released into the water. The influence of chloride and bicarbonate on hexachlorocyclohexanes degradation was analyzed in milli-Q water and in groundwater. Hexachlorocyclohexane conversion at 390 min decreases from 98% to 83, 75 and 65% in the presence of chloride, bicarbonate or groundwater, respectively. Results obtained with compound parabolic collectors and solar light using 2600 µM Na2S2O8 and 63 µM Fe for removing hexachlorocyclohexanes agreed with those from the solar simulator reactor, supporting using solar light to activate persulfate for sustainable abatement of persistent organic pollutants in aqueous matrixes.

Catadoras de materiais recicláveis: estratégias de resistência e medicamentos durante a pandemia de covid-19 / Women collectors of recyclables: resistance strategies and medicines during the COVID-19 pandemic

Resumo A catação de materiais recicláveis é uma ocupação com crescente número de trabalhadores, que encontram nela sustento diante das desigualdades socioeconômicas e do desemprego. Este artigo descreve as estratégias de resistência de mulheres catadoras que fazem parte de uma associação no Nordeste brasileiro, além da forma como elas lidaram com problemas de saúde durante a pandemia de covid-19, especialmente no que se refere aos medicamentos. Utilizamos uma abordagem quantitativa e uma etnográfica, coletando dados sociodemográficos de 13 participantes e dos medicamentos presentes em suas casas, e também realizando observação participante e entrevistas aprofundadas. Em meio à crise sanitária, foram mencionados problemas como o desemprego, as relações de gênero, a violência e os estigmas do trabalho. Se por um lado a pandemia vulnerabilizou ainda mais alguns segmentos populacionais, por outro potencializou estratégias coletivas de enfrentamento. As catadoras e a associação se organizaram para obter insumos e melhorias tanto na sede quanto no bairro. Identificamos 58 unidades de medicamentos, prescritos e obtidos principalmente na Unidade Básica de Saúde. Desses, 27,6% tinham ação sobre o sistema nervoso (analgésicos, psicolépticos e psicoanalépticos) e 17,2% sobre o sistema cardiovascular e sobre o trato alimentar e metabolismo. As catadoras desenvolveram práticas de autoatenção com os medicamentos, destacando o papel central deles no enfrentamento dos problemas de saúde.

Abstract The collection of recyclable materials is an occupation with an increasing number of workers, who find in it a livelihood in a context of socioeconomic inequalities and unemployment. This article describes resistance strategies of women collectors who are part of an association in Northeast Brazil, in addition to describing how they managed health problems during the COVID-19 pandemic, especially regarding medicines. A quantitative and an ethnographic approach were used by collecting data on sociodemographic and medicines present in the homes of 13 participants and conducting participant observation and in-depth interviews. Amid the health crisis, the participants mentioned problems such as unemployment, gender relations, violence, and work stigmas. If, on the one hand, the pandemic has further increased vulnerability for certain population segments, on the other hand, it has enhanced collective resistance strategies. The collectors of the association organized to obtain various materials and benefits both for their headquarters and their neighborhood. We identified 58 units of medicines, prescribed and obtained mainly at the Basic Health Unit. Of these, 27.6% had action on the nervous system (analgesics, psycholeptics, and psychoanaleptics) and 17.2% on the cardiovascular system and on the alimentary tract and metabolism. The collectors developed self-attention practices with the medicines highlighting their central role in facing health problems.

Exploring the potential of the halotolerant bacterial strain Bacillus subtilis LN8B as an ecofriendly sulfide collector for seawater flotation.

AIM: To assess the effectiveness of Bacillus subtilis strain LN8B as a biocollector for recovering pyrite (Py) and chalcopyrite (CPy) in both seawater (Sw) and deionized water (Dw), and to explore the underlying adhesion mechanism in these bioflotation experiments. MATERIALS AND METHODS: The bioflotation test utilized B. subtilis strain LN8B as the biocollector through microflotation experiments. Additionally, frother methyl isobutyl carbinol (MIBC) and conventional collector potassium amyl xanthate (PAX) were introduced in some experiments. The zeta potential (ZP) and Fourier-transform infrared spectroscopy (FTIR) was employed to explore the adhesion mechanism of Py and CPy interacting with the biocollector in Sw and Dw. The adaptability of the B. subtilis strain to different water types and salinities was assessed through growth curves measuring optical density. Finally, antibiotic susceptibility tests were conducted to evaluate potential risks of the biocollector. RESULTS: Superior outcomes were observed in Sw where Py and CPy recovery was ∼39.3% ± 7.7% and 41.1% ± 5.8%, respectively, without microorganisms' presence. However, B. subtilis LN8B potentiate Py and CPy recovery, reaching 72.8% ± 4.9% and 84.6% ± 1.5%, respectively. When MIBC was added, only the Py recovery was improved (89.4% ± 3.6%), depicting an adverse effect for CPy (81.8% ± 1.1%). ZP measurements indicated increased mineral surface hydrophobicity when Py and CPy interacted with the biocollector in both Sw and Dw. FTIR revealed the presence of protein-related amide peaks, highlighting the hydrophobic nature of the bacterium. The adaptability of this strain to diverse water types and salinities was assessed, demonstrating remarkable growth versatility. Antibiotic susceptibility tests indicated that B. subtilis LN8B was susceptible to 23 of the 25 antibiotics examined, suggesting it poses minimal environmental risks. CONCLUSIONS: The study substantiates the biotechnological promise of B. subtilis strain LN8B as an efficient sulfide collector for promoting cleaner mineral production. This effectiveness is attributed to its ability to induce mineral surface hydrophobicity, a result of the distinct characteristics of proteins within its cell wall.

Prototype of Data Collector from Textronic Sensors.

In the era of miniaturization of electronic equipment and the need to connect sensors with textile materials, including clothing, the processing of signals received from the implemented sensors becomes an important issue. Information obtained by measuring the electrical properties of the sensors must be sent, processed, and visualized. For this purpose, the authors of this article have developed a prototype of a data collector obtained from textronic sensors created on composite textile substrates. The device operates in a system consisting of an electronic module based on the nRF52 platform, which supports wireless communication with sensors using Bluetooth technology and transmits the obtained data to a database hosted on the Microsoft Azure platform. A mobile application based on React Native technology was created to control the data stream. The application enables automatic connection to the selected collector, data download and their presentation in the form of selected charts. Initial verification tests of the system showed the correctness and reliability of its operation, and the presented graphs created from the obtained data indicate the usefulness of the device in applications where measurements and recording of impedance, resistance, and temperature are necessary. The presented prototype of a data collector can be used for resistance, impedance, and temperature measurements in the case of textronic structures but also in other wearable electronic systems.

Recent progress on flat plate solar collectors equipped with nanofluid and turbulator: state of the art.

This paper reviews the impacts of employing inserts, nanofluids, and their combinations on the thermal performance of flat plate solar collectors. The present work outlines the new studies on this specific kind of solar collector. In particular, the influential factors upon operation of flat plate solar collectors with nanofluids are investigated. These include the type of nanoparticle, kind of base fluid, volume fraction of nanoparticles, and thermal efficiency. According to the reports, most of the employed nanofluids in the flat plate solar collectors include Al2O3, CuO, and TiO2. Moreover, 62.34%, 16.88%, and 11.26% of the utilized nanofluids have volume fractions between 0 and 0.5%, 0.5 and 1%, and 1 and 2%, respectively. The twisted tape is the most widely employed of various inserts, with a share of about one-third. Furthermore, the highest achieved flat plate solar collectors' thermal efficiency with turbulator is about 86.5%. The review is closed with a discussion about the recent analyses on the simultaneous use of nanofluids and various inserts in flat plate solar collectors. According to the review of works containing nanofluid and turbulator, it has been determined that the maximum efficiency of about 84.85% can be obtained from a flat plate solar collector. It has also been observed that very few works have been done on the combination of two methods of employing nanofluid and turbulator in the flat plate solar collector, and more detailed work can still be done, using more diverse nanofluids (both single and hybrid types) and turbulators with more efficient geometries.

Melt Electrowriting of Nylon-12 Microfibers with an Open-Source 3D Printer.

This study demonstrates how either a heated flat or cylindrical collector enables defect-free melt electrowriting (MEW) of complex geometries from high melting temperature polymers. The open-source "MEWron" printer uses nylon-12 filament and combined with a heated flat or cylindrical collector, produces well-defined fibers with diameters ranging from 33 ± 4 to 95 ± 3 µm. Processing parameters for stable jet formation and minimal defects based on COMSOL thermal modeling for hardware design are optimized. The balance of processing temperature and collector temperature is achieved to achieve auxetic patterns, while showing that annealing nylon-12 tubes significantly alters their mechanical properties. The samples exhibit varied pore sizes and wall thicknesses influenced by jet dynamics and fiber bridging. Tensile testing shows nylon-12 tubes are notably stronger than poly(ε-caprolactone) ones and while annealing has limited impact on tensile strength, yield, and elastic modulus, it dramatically reduces elongation. The equipment described and material used broadens MEW applications for high melting point polymers and highlights the importance of cooling dynamics for reproducible samples.

Application of interface treatment at different positionp-nc-Si:H hole collector of silicon heterojunction cells.

The hole collector in silicon heterojunction cells serves not only as an integral component of thep/njunction, determining the strength of the built-in electric field, but also as a layer responsible for hole transport, thereby affecting carrier transport capacity. To enhance carrier extraction and transport properties of the hole collector, various interface treatments have been employed onp-type nanocrystalline (p-nc-Si:H) hole collectors. Through an examination of characteristics such as dark conductivity, crystallinity, and contact resistance, the impact of interface treatment onp-nc-Si:H hole collectors is clarified. Furthermore, considering distinct requirements for the hole collector at different locations, interface treatment processes are optimized accordingly. The introduction of interface treatment onp-nc-Si:H hole collectors has demonstrated significant enhancement of both front and rear junction cell efficiencies, which increased from 17.74% to 21.61% and from 16.83% to 20.92%, respectively.

Highly Transparent, Temperature-Resistant, and Flexible Polyimide Aerogels for Solar Energy Collection.

Advanced aerogel materials with low thermal conductivity and high transparency have shown great application prospects in the solar thermal energy conversion field. However, most aerogels do not meet these requirements due to their low optical transparency and poor mechanical properties. To tackle this problem, we have created versatile polyimide (PI) aerogel materials by adjusting the monomers to alter their molecular structure. These materials exhibit exceptional thermal insulation properties and high transparency, making them ideal for use in the construction of efficient solar collector devices. Incorporating 1,3,5-benzenetricarbonyl trichloride into PI aerogel results in high strength (>3 MPa) and excellent transmittance (>90%) over a broad range of wavelengths (500-2650 nm). The as-prepared PI aerogel solar collector (PIASC) also exhibits a low thermal conductivity (0.032 W/mK), a low density (0.1 g/cm3), and high porosity (90%). By changing the shape of the collector from a flat plate to a cylindrical ring, the heat collection efficiency and capacity are significantly improved, resulting in efficient heat collection. The circular ring collector has a maximum heat collection temperature of 236.8 °C. The PIASC, which is both flexible and highly transparent, is an ideal candidate for advanced optical elements and solar collectors.

Recent Advances in Structural Optimization and Surface Modification on Current Collectors for High-Performance Zinc Anode: Principles, Strategies, and Challenges.

The last several years have witnessed the prosperous development of zinc-ion batteries (ZIBs), which are considered as a promising competitor of energy storage systems thanks to their low cost and high safety. However, the reversibility and availability of this system are blighted by problems such as uncontrollable dendritic growth, hydrogen evolution, and corrosion passivation on anode side. A functionally and structurally well-designed anode current collectors (CCs) is believed as a viable solution for those problems, with a lack of summarization according to its working mechanisms. Herein, this review focuses on the challenges of zinc anode and the mechanisms of modified anode CCs, which can be divided into zincophilic modification, structural design, and steering the preferred crystal facet orientation. The possible prospects and directions on zinc anode research and design are proposed at the end to hopefully promote the practical application of ZIBs.

3D Lithiophilic CuZrAg Metallic Glass Based-Current Collector for High-Performance Lithium Metal Anode.

Lithium metal anodes face several challenges in practical applications, such as dendrite growth, poor cycle efficiency, and volume variation. 3D hosts with lithiophilic surfaces have emerged as a promising design strategy for anodes. In this study, inspiration from the intrinsic isotropy, chemical heterogeneity, and wide tunability of metallic glass (MG) is drew to develop a 3D mesoporous host with a lithiophilic surface. The CuZrAg MG is prepared using the scalable melt-spinning technique and subsequently treated with a simple one-step chemical dealloying method. This resultes in the creation of a host with a homogeneously distributed abundance of lithium affinity sites on the surface. The excellent lithiophilic property and capability for uniform lithium deposition of the 3D CuZrAg electrode have been confirmed through theoretical calculations. Therefore, the 3D CuZrAg electrode displays excellent cyclic stability for over 400 cycles with 96% coulomb efficiency, and ultra-low overpotentials of 5 mV for over 2000 h at 1.0 mA cm-2 and 1.0 mAh cm-2 . Additionally, the full cells partied with either LiFePO4 or LiNi0.8 Co0.1 Mn0.1 O2 cathode deliver exceptional long-term cyclability and rate capability. This work demonstrates the great potential of metallic glass in lithium metal anode application.

Polyimide Compounds For Post-Lithium Energy Storage Applications.

The exploration of cathode and anode materials that enable reversible storage of mono and multivalent cations has driven extensive research on organic compounds. In this regard, polyimide (PI)-based electrodes have emerged as a promising avenue for the development of post-lithium energy storage systems. This review article provides a comprehensive summary of the syntheses, characterizations, and applications of PI compounds as electrode materials capable of hosting a wide range of cations. Furthermore, the review also delves into the advancements in PI based solid state batteries, PI-based separators, current collectors, and their effectiveness as polymeric binders. By highlighting the key findings in these areas, this review aims at contributing to the understanding and advancement of PI-based structures paving the way for the next generation of energy storage systems.